Difference between revisions of "Junctions"

From Mashinky
Jump to: navigation, search
 
(19 intermediate revisions by 4 users not shown)
Line 1: Line 1:
 
{{Game Manual}}
 
{{Game Manual}}
  
−
All the exaples below have the basic signaling shown on the images, better signalling positions can improve their preformance if nessesary.
+
This section contains a selection of basic junctions that can be used in a railway network in Mashinky. These junctions vary in complexity and utility. The intention of this is to provide fundamental ideas, which can be built upon to create more complex track configurations with higher train capacity.
  
−
==Y Junctions==
+
All the examples below have the basic signaling shown on the images, better signalling positions can improve their performance.
 +
 
 +
==Y-Junctions==
 +
 
 +
Y-Junctions act as a convergence or divergence points between two routes on a railway line. Simple solutions work well, but tend to have significant drawbacks when used at high capacity.
  
−
Y-Junctions act as a convergence or divergence points between two routes on a railway line. Simple solutions tend to work well, but tend to have significant drawbacks when used at high capacity.
 
 
{| class="wikitable"
 
{| class="wikitable"
 
! Image
 
! Image
Line 30: Line 33:
 
| [[File:Junction_Branchline_Ladder.png|200px]]
 
| [[File:Junction_Branchline_Ladder.png|200px]]
 
| Branchline with Ladder Junction
 
| Branchline with Ladder Junction
−
| A basic junction from double track to a 2 way single track line. Only one locomotive can use the Branchline
+
| A basic junction from double track to a two-way single track line. Only one train can use the Branchline
 
| Low
 
| Low
 
| 3
 
| 3
Line 37: Line 40:
 
| [[File:Junction_Branchline_Split.png|200px]]
 
| [[File:Junction_Branchline_Split.png|200px]]
 
| Branchline with double track entrance
 
| Branchline with double track entrance
−
| A advance junction from double track to a 2 way single track line. Multiple trains can use the branchline.
+
| An advanced junction from double track to a two-way single track line. Multiple trains can use the branchline.
 
| Low
 
| Low
 
| 3
 
| 3
Line 44: Line 47:
 
| [[File:Junction_Mainline_Split.png|200px]]
 
| [[File:Junction_Mainline_Split.png|200px]]
 
| Mainline Split
 
| Mainline Split
−
| A basic junction for splitting a double track mainline into two directions. Flow is restricted to 1 train accross the junction even if two trains accessing the junction do not cross each others paths.
+
| A basic junction for splitting a double track mainline into two directions. Flow is restricted to one train across the junction even if two trains accessing the junction do not cross each others paths.
 
| Low
 
| Low
 
| 2
 
| 2
Line 51: Line 54:
 
| [[File:Junction_Mainline_Continuous_Flow.png|200px]]
 
| [[File:Junction_Mainline_Continuous_Flow.png|200px]]
 
| Mainline Continuous Flow Junction
 
| Mainline Continuous Flow Junction
−
| A advanced mainline junction which poses no restriction on the flow of trains.
+
| An advanced mainline junction which poses no restriction on the flow of trains.
 
| Low
 
| Low
 
| 2
 
| 2
 +
| 0
 +
|-
 +
| [[File:High_Traffic_Merger.png|200px]]
 +
| High Traffic Merger
 +
| An advanced merging junction which allows for very high traffic levels, with almost uninterrupted flow. For best results, only merge back the third outgoing track a full train length forward. Also, ideally, trains coming from below should have a destination (or waypoint) to the right side of the line. Pay attention that the lines at the point marked "A" don't connect, and that the 3 signals marked in blue are chain signals. IMPORTANT NOTICE: To avoid unexpected behavior, never connect the lines in that "#" block to anything else.
 +
| High
 +
| 3
 
| 0
 
| 0
 
|}
 
|}
  
−
==Crossings==
+
==T-Junctions==
 +
These Junctions differ from Y-Junctions as they allow trains from any of the 3 directions to split into either of the 2 other outbound tracks.
 +
 
 +
{| class="wikitable"
 +
! Image
 +
! Name
 +
! Information
 +
! Signalling Complexity
 +
! No. of Points
 +
! No. of Crossings
 +
|-
 +
| [[File:Junction_3-Way_Free-Mainline.png|200px]]
 +
| 3-Way Junction with free Mainline
 +
| A big mainline junction that can handle a lot of trains. PRO: No restriction on the flow of trains on the mainline. Trains can exit to every direction. CON: Tricky tunnel construction.
 +
| Low
 +
| 3
 +
| 0
 +
|-
 +
| [[File:Junction_small_4-to-2-3Way.png|200px]]
 +
| Small 4 Line to 2 Line Junction
 +
| Big 3-Way Junction for use on 4 Mainlines. This junction that can handle lots of trains. PRO: No restriction on the flow of trains on the mainline. Trains can exit to every direction. CON: Tricky tunnel construction. Big junction.
 +
| Medium
 +
| 6
 +
| 0
 +
|-
 +
| [[File:Junction_big_4-to-2-3Way.png|200px]]
 +
| Big 4 Line to 2 Line Junction
 +
| Big 3-Way Junction for use on 4 Mainlines. This junction that can handle lots of trains. PRO: Doubble Bridges on Mainline. Seems to be complicated. CON: Tricky tunnel construction. Big junction. It is complicated.
 +
| Medium
 +
| 8
 +
| 0
 +
|-
 +
| [[File:Junction_Big_4_line_3Way.png|200px]]
 +
| Big 4 Line 3-Way Junction
 +
| Big 3-Way Junction for use with 4 Mainlines. This junction that can handle a huge amount of trains. PRO: Easy to build 4 Line Junction. Not too Big. CON: Tricky tunnel construction. Long tunnels lead to 6 field long signal block.
 +
| Medium
 +
| 8
 +
| 0
 +
|}
 +
 
 +
==X-Crossings==
  
 
These are for locations on the tracks where two lines must cross over each other, with no tracked connection between the two.
 
These are for locations on the tracks where two lines must cross over each other, with no tracked connection between the two.
Line 71: Line 121:
 
| [[File:Junction_Crossing_Level.png|200px]]
 
| [[File:Junction_Crossing_Level.png|200px]]
 
| Crossing on the Level
 
| Crossing on the Level
−
| A simple method for two mainlines to cross, Flow is restricted to 1 train accross the junction even if two trains accessing the junction do not cross each others paths.
+
| A simple method for two mainlines to cross. Flow is restricted to one train across the junction even if two trains accessing the junction do not cross each others paths.
 
| Low
 
| Low
 
| 0
 
| 0
Line 88: Line 138:
 
| None
 
| None
 
| 0
 
| 0
 +
| 0
 +
|}
 +
 +
 +
==X-Junctions==
 +
These are for locations on the tracks where lines cross over and trains can switch between both lines. These junctions are usually complex to build and take a lot of space.
 +
 +
{| class="wikitable"
 +
! Image
 +
! Name
 +
! Information
 +
! Signalling Complexity
 +
! No. of Points
 +
! No. of Crossings
 +
|-
 +
| [[File:Junction_Clover.png|200px]]
 +
| Clover Leaf Interchange
 +
| A Line that allows a continuous flow of trains over it. Trains can exit the junction in all 4 directions. This junction takes up a lot of space, reducing its feasibility to large flat maps with long distances between train destinations.
 +
| Med
 +
| 16
 +
| 0
 +
|-
 +
| [[File:Junction_Jewel.png|200px]]
 +
| Jewel
 +
| A continuous flow junction, which allows trains to exit in all 4 directions. This junction is more compact than the Clover Leaf, however it incorporates more gradients and curves which limits train speeds through the junction.
 +
| Low
 +
| 8
 +
| 0
 +
|-
 +
| [[File:Junction_Diamond.png|200px]]
 +
| Diamond Crossing
 +
| This junction is useful for placing in stations at the end of the line. This junction can be combined with the [[Junctions#Term|Main Terminus]] to prevent train blockages when operating with more trains than the number of available platforms.
 +
| High
 +
| 4
 +
| 1
 +
|-
 +
| [[File:Junction_Small_4-Way.png|200px]]
 +
| Box Junction
 +
| Again a continuous flow junction, which allows trains to exit in all directions. PRO: The track splits before being merged to avoid double use of individual sections. CON: The two long bridges, which each results in a 7-field wide Signal block.
 +
| Medium
 +
| 16
 +
| 0
 +
|-
 +
| [[File:Junction_4-Way_Snake.png|200px]]
 +
| Windmill Junction
 +
| Enhanced Version of the Box Junction. PRO: Tracks Split before Merge and shorter bridges to cut the max Block size to a 5-field wide Signal block. CON: Every Train that turns left or crosses the juntion has to climb 2 slopes.
 +
| Medium
 +
| 16
 +
| 0
 +
|-
 +
| [[File:Junction_Big_4-line_4way.png|200px]]
 +
| Big Windmill Junction
 +
| 4 Line Version of the Windmill Junction. PRO: Tracks Split before Merge. Easy to Bild. Can handle a hugh ammount of Trains. CON: A realy big Junction. Long tunnels lead to 6 field long signal block. 
 +
| Medium
 +
| 12
 
| 0
 
| 0
 
|}
 
|}
Line 93: Line 198:
 
==Terminus Junctions==
 
==Terminus Junctions==
  
−
These are a selection of junctions that go at the end of a railway line, these are deigned for both high capacity and the ability to turn the trains arround to prevent the locomotives from reversing on their return journey.
+
These are a selection of junctions that go at the end of a railway line, these are designed for both high capacity and the ability to turn the trains around to prevent the locomotives from reversing on their return journey. The maximum number of trains refers the number of trains can use the station without a risk of causing a blockage. All stations below can have their capacity increased by placing block [[signals]].
  
 
{| class="wikitable"
 
{| class="wikitable"
Line 100: Line 205:
 
! Information
 
! Information
 
! Signalling Complexity
 
! Signalling Complexity
 +
! Max No. of trains
 
! No. of Points
 
! No. of Points
 
! No. of Crossings
 
! No. of Crossings
Line 107: Line 213:
 
| A simple method of turning around trains at the end of the line.
 
| A simple method of turning around trains at the end of the line.
 
| Low
 
| Low
 +
| 2
 
| 1
 
| 1
 
| 0
 
| 0
Line 114: Line 221:
 
| An alternative method of turning around trains at the end of the line.
 
| An alternative method of turning around trains at the end of the line.
 
| Medium
 
| Medium
 +
| 2
 
| 3
 
| 3
 
| 0
 
| 0
Line 119: Line 227:
 
| [[File:Junction_Roundabout.png|200px]]
 
| [[File:Junction_Roundabout.png|200px]]
 
| Roundabout
 
| Roundabout
−
| An advanced version of the return loop, this version allows multiple lines to feed into a single station. One way signals must be used to allow for continuous flow.
+
| An advanced version of the return loop, this version allows multiple lines to feed into a single station. One-way signals must be used to allow for continuous flow.
 
| High
 
| High
 +
| n
 
| 3 x n
 
| 3 x n
 
| 0
 
| 0
 
|-
 
|-
 
| [[File:Junction_Turminums.png|200px]]
 
| [[File:Junction_Turminums.png|200px]]
−
| Main Terminus
+
| <span id="Term"></span>Main Terminus
−
| A high capacity railway station that works with a continuous supply of trains. There is no reversing facilities, therefore best used when reversing trains are disabled.
+
| A high capacity railway station that works with a continuous supply of trains. There are no reversing facilities, therefore best used when reversing trains are disabled. Further signalling and platforms can be added to increase the capacity of the Station beyond a 3-train limit.
 
| Medium
 
| Medium
 +
| 3
 
| 7
 
| 7
 
| 2
 
| 2
Line 133: Line 243:
 
| [[File:Junction_Turminums_With_Triangle.png|200px]]
 
| [[File:Junction_Turminums_With_Triangle.png|200px]]
 
| Main Terminus with Turning Triangle
 
| Main Terminus with Turning Triangle
−
| A variation of the Terminus station with reversing facilities
+
| A variation of the Terminus station with reversing facilities. Further signalling and platforms can be added to increase the capacity of the Station beyond a 3-train limit.
 
| High
 
| High
 +
| 3
 
| 8
 
| 8
 
| 2
 
| 2
 +
|}
 +
 +
==Line Balancers==
 +
 +
These junctions allow for trains choosing different lanes on parallel tracking. They are designed not only to balance trains between lanes but also to let other nearby junctions to merge trains to or split from only one side of the parallel tracks, which may lead to simpler versions of those junctions.
 +
 +
The maximum number of trains refers to the number of trains which can '''simultaneously''' use the balancer without much risk of having a train stopped inside. Depending on other aspects of the network, the no-crossing versions may easily handle tracks with dozens to a couple hundred trains.
 +
 +
Ideally, only one balancer should be placed, in each direction, between each pair of other junctions. Having more than one consecutive balancer on the same track may lead to trains trying to change lanes too often and blocking one lane while waiting on the sideway paths' signals for the other lane to clear.
 +
 +
{| class="wikitable"
 +
! Image
 +
! Name
 +
! Information
 +
! Signalling Complexity
 +
! Max No. of trains
 +
! No. of Points
 +
! No. of Crossings
 +
|-
 +
| [[File:Diamond_Balancer.png|200px]]
 +
| Diamond Balancer
 +
| The simplest balancer possible. Ideal for very low traffic tracks.
 +
| Medium
 +
| 1-2
 +
| 2
 +
| 1
 +
|-
 +
| [[File:Underpass_Balancer1.png|200px]]
 +
| Underpass Balancer v1
 +
| Having no level crossings, this is ideal for medium to high traffic tracks. Use this version if the lower lane has more incoming trains than the upper one.
 +
| High
 +
| 3-4
 +
| 2
 +
| 0
 +
|-
 +
| [[File:Underpass_Balancer2.png|200px]]
 +
| Underpass Balancer v2
 +
| Same as above, but to be used if the upper lane has more incoming trains than the lower one.
 +
| High
 +
| 3-4
 +
| 2
 +
| 0
 
|}
 
|}
  

Latest revision as of 03:08, 19 September 2020

This section contains a selection of basic junctions that can be used in a railway network in Mashinky. These junctions vary in complexity and utility. The intention of this is to provide fundamental ideas, which can be built upon to create more complex track configurations with higher train capacity.

All the examples below have the basic signaling shown on the images, better signalling positions can improve their performance.

Y-Junctions

Y-Junctions act as a convergence or divergence points between two routes on a railway line. Simple solutions work well, but tend to have significant drawbacks when used at high capacity.

Image Name Information Signalling Complexity No. of Points No. of Crossings
Junction Single.png Single Track Junction The most basic junction possible in the game Low 1 0
Junction Single Pass.png Single Track Junction with passing loop A more advanced junction with space to allow trains to pass. Medium 3 0
Junction Branchline Ladder.png Branchline with Ladder Junction A basic junction from double track to a two-way single track line. Only one train can use the Branchline Low 3 1
Junction Branchline Split.png Branchline with double track entrance An advanced junction from double track to a two-way single track line. Multiple trains can use the branchline. Low 3 1
Junction Mainline Split.png Mainline Split A basic junction for splitting a double track mainline into two directions. Flow is restricted to one train across the junction even if two trains accessing the junction do not cross each others paths. Low 2 1
Junction Mainline Continuous Flow.png Mainline Continuous Flow Junction An advanced mainline junction which poses no restriction on the flow of trains. Low 2 0
High Traffic Merger.png High Traffic Merger An advanced merging junction which allows for very high traffic levels, with almost uninterrupted flow. For best results, only merge back the third outgoing track a full train length forward. Also, ideally, trains coming from below should have a destination (or waypoint) to the right side of the line. Pay attention that the lines at the point marked "A" don't connect, and that the 3 signals marked in blue are chain signals. IMPORTANT NOTICE: To avoid unexpected behavior, never connect the lines in that "#" block to anything else. High 3 0

T-Junctions

These Junctions differ from Y-Junctions as they allow trains from any of the 3 directions to split into either of the 2 other outbound tracks.

Image Name Information Signalling Complexity No. of Points No. of Crossings
Junction 3-Way Free-Mainline.png 3-Way Junction with free Mainline A big mainline junction that can handle a lot of trains. PRO: No restriction on the flow of trains on the mainline. Trains can exit to every direction. CON: Tricky tunnel construction. Low 3 0
Junction small 4-to-2-3Way.png Small 4 Line to 2 Line Junction Big 3-Way Junction for use on 4 Mainlines. This junction that can handle lots of trains. PRO: No restriction on the flow of trains on the mainline. Trains can exit to every direction. CON: Tricky tunnel construction. Big junction. Medium 6 0
Junction big 4-to-2-3Way.png Big 4 Line to 2 Line Junction Big 3-Way Junction for use on 4 Mainlines. This junction that can handle lots of trains. PRO: Doubble Bridges on Mainline. Seems to be complicated. CON: Tricky tunnel construction. Big junction. It is complicated. Medium 8 0
Junction Big 4 line 3Way.png Big 4 Line 3-Way Junction Big 3-Way Junction for use with 4 Mainlines. This junction that can handle a huge amount of trains. PRO: Easy to build 4 Line Junction. Not too Big. CON: Tricky tunnel construction. Long tunnels lead to 6 field long signal block. Medium 8 0

X-Crossings

These are for locations on the tracks where two lines must cross over each other, with no tracked connection between the two.

Image Name Information Signalling Complexity No. of Points No. of Crossings
Junction Crossing Level.png Crossing on the Level A simple method for two mainlines to cross. Flow is restricted to one train across the junction even if two trains accessing the junction do not cross each others paths. Low 0 4
Junction Bridge Overpass.png Overpass Using bridges to cross other tracks, top line must be perpendicular to the grid, lower lines can be in any orientation. Minimum hight difference of 3 between the two lines. None 0 0
Junction Tunnel Underpass.png Underpass Using Tunnels to cross under other tracks, bottom line must be perpendicular to the grid, top lines may be in any orientation. Minimum hight difference of 3 between the two lines. None 0 0


X-Junctions

These are for locations on the tracks where lines cross over and trains can switch between both lines. These junctions are usually complex to build and take a lot of space.

Image Name Information Signalling Complexity No. of Points No. of Crossings
Junction Clover.png Clover Leaf Interchange A Line that allows a continuous flow of trains over it. Trains can exit the junction in all 4 directions. This junction takes up a lot of space, reducing its feasibility to large flat maps with long distances between train destinations. Med 16 0
Junction Jewel.png Jewel A continuous flow junction, which allows trains to exit in all 4 directions. This junction is more compact than the Clover Leaf, however it incorporates more gradients and curves which limits train speeds through the junction. Low 8 0
Junction Diamond.png Diamond Crossing This junction is useful for placing in stations at the end of the line. This junction can be combined with the Main Terminus to prevent train blockages when operating with more trains than the number of available platforms. High 4 1
Junction Small 4-Way.png Box Junction Again a continuous flow junction, which allows trains to exit in all directions. PRO: The track splits before being merged to avoid double use of individual sections. CON: The two long bridges, which each results in a 7-field wide Signal block. Medium 16 0
Junction 4-Way Snake.png Windmill Junction Enhanced Version of the Box Junction. PRO: Tracks Split before Merge and shorter bridges to cut the max Block size to a 5-field wide Signal block. CON: Every Train that turns left or crosses the juntion has to climb 2 slopes. Medium 16 0
Junction Big 4-line 4way.png Big Windmill Junction 4 Line Version of the Windmill Junction. PRO: Tracks Split before Merge. Easy to Bild. Can handle a hugh ammount of Trains. CON: A realy big Junction. Long tunnels lead to 6 field long signal block. Medium 12 0

Terminus Junctions

These are a selection of junctions that go at the end of a railway line, these are designed for both high capacity and the ability to turn the trains around to prevent the locomotives from reversing on their return journey. The maximum number of trains refers the number of trains can use the station without a risk of causing a blockage. All stations below can have their capacity increased by placing block signals.

Image Name Information Signalling Complexity Max No. of trains No. of Points No. of Crossings
Junction Return Loop.png Return Loop A simple method of turning around trains at the end of the line. Low 2 1 0
Junction Turning Triangle.png Turning Triangle An alternative method of turning around trains at the end of the line. Medium 2 3 0
Junction Roundabout.png Roundabout An advanced version of the return loop, this version allows multiple lines to feed into a single station. One-way signals must be used to allow for continuous flow. High n 3 x n 0
Junction Turminums.png Main Terminus A high capacity railway station that works with a continuous supply of trains. There are no reversing facilities, therefore best used when reversing trains are disabled. Further signalling and platforms can be added to increase the capacity of the Station beyond a 3-train limit. Medium 3 7 2
Junction Turminums With Triangle.png Main Terminus with Turning Triangle A variation of the Terminus station with reversing facilities. Further signalling and platforms can be added to increase the capacity of the Station beyond a 3-train limit. High 3 8 2

Line Balancers

These junctions allow for trains choosing different lanes on parallel tracking. They are designed not only to balance trains between lanes but also to let other nearby junctions to merge trains to or split from only one side of the parallel tracks, which may lead to simpler versions of those junctions.

The maximum number of trains refers to the number of trains which can simultaneously use the balancer without much risk of having a train stopped inside. Depending on other aspects of the network, the no-crossing versions may easily handle tracks with dozens to a couple hundred trains.

Ideally, only one balancer should be placed, in each direction, between each pair of other junctions. Having more than one consecutive balancer on the same track may lead to trains trying to change lanes too often and blocking one lane while waiting on the sideway paths' signals for the other lane to clear.

Image Name Information Signalling Complexity Max No. of trains No. of Points No. of Crossings
Diamond Balancer.png Diamond Balancer The simplest balancer possible. Ideal for very low traffic tracks. Medium 1-2 2 1
Underpass Balancer1.png Underpass Balancer v1 Having no level crossings, this is ideal for medium to high traffic tracks. Use this version if the lower lane has more incoming trains than the upper one. High 3-4 2 0
Underpass Balancer2.png Underpass Balancer v2 Same as above, but to be used if the upper lane has more incoming trains than the lower one. High 3-4 2 0
Retrieved from "https://mashinky.com/wiki/index.php?title=Junctions&oldid=4955"